Research on Normal Restitution Coefficient of Rockfall Collision
Vol 2, Issue 1, 2022
VIEWS - 91 (Abstract)
Download PDF
Abstract
In the process of designing the engineering protection, the accuracy of calculating the trajectory of rockfall movement mainly depends on the value of normal restitution coefficient. The rockfall collision process is captured by DIMS9100 analysis system in the indoor physical model test where velocity parameters under different rockfall size, slope gradient, incident velocity and slope material conditions are collected. Then the normal collision restitution coefficient can be obtain by analyzing velocity parameters before and after collision. The results show that the normal restitution coefficient is not significantlyassociated with the size of rockfall and the incident velocity, but only related to the slope and the mechanical properties of slope materials; The material change from soil layer, simulated lawn to concrete, the corresponding stiffness increases as slope gradient of the soil layer, simulated lawn and concrete increases respectively, and therefore the normal recovery coefficient also shows an increasing trend. When the slopegradient and slope materials are considered in practical engineering applications, the normal restitution coefficient range of rockfall collision is 0.32 ~0.62 and the value of normal restitution coefficient is smaller than that of the existing data. It indicates that thevelocity decreases greatly in the normal direction during the test.
Keywords
References
MANGWANDI C, et al.The coefficient of restitution of different representative types of granule [J]. Chemical Engineering Science,2007,62(1/2):437-450.
Li Yiliang, Qiu Xinming, Zhang Xiong. Different definitions of recovery coefficients and their applicability analysis [J]. Mechanics and Practice, 2015 (06): 773-777.
He Siming, Wu Yong, Li Xinpo. Research on the Recovery Coefficient of Rolling Stone Impact Collision [J]. Geotechnical Mechanics, 2009, 30 (3): 623-627.
Yang Haiqing, Zhou Xiaoping. A new method for calculating the trajectory of rock falling on slopes [J]. Geotechnical Mechanics, 2009 (11): 3411-3416.
Chau K T, Wong RHC, Wu J J. Coefficient of restitution and rotational motions of rockfall impacts [J]. International Journal of Rock Mechanics and Mining Science,2002, 39: 69-77.
Ye Siqiao, Gong Shangqing. Model experimental study on normal recovery coefficient of rockfall collision [J]. China Railway Science, 2015 (04): 13-19.
Ye Siqiao, Gong Shangqing, Wang Linfeng, Xie Tao, Wang Zongjian. Research on the Value of Tangential Recovery Coefficient for Rockfall Collisions [J]. China Railway Science, 2018 (01): 8-15.
Zhang Guangcheng, Xiang Xin, Tang Huiming. On site testing and numerical calculation of the recovery coefficient of rockfall collision [J]. Journal of Rock Mechanics and Engineering, 2011, 30 (6): 126-127.
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 WANG Nan nan, CHEN Fu bang, FENG Ai guo
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
ISSN
2810-918X (Online)